A 14.8V 99Wh, V-Mount, Mini PAGlink Battery, that can be linked in series with other MPL batteries, in a similar state of charge, combining voltages to power high-voltage equipment. It features an infrared sensor, programmed to read a barcode, applied to the battery mount of high-voltage equipment. As an additional safeguard, a 3-second press of the Cinergy battery display button is required to instigate high-voltage mode.

Away from the barcode, the battery switches to low-voltage mode for charging, or powering 12V equipment. It can be linked to other MPL batteries, regardless of state of charge and rating, to increase capacity/run-time or to increase current draw (up to 12A). Batteries can be hot-swapped for continuous running.

With Cinergy, the same MPL batteries can be used to power both 14V and 28V kit; it’s not possible to accidentally supply 28V to low-voltage equipment; there is no need for 28V battery chargers; and you can fly with the power you need for 28V kit (28V Li-Ion batteries are not permitted on passenger flights).

PAG’s new modular battery design enables an expired cell-pack to be replaced by authorised, local service centres, whilst maintaining the battery’s flight-safety credentials. Case parts and electronic modules can be reused, reducing e-waste for greater sustainability as well as reducing the cost of your next battery.

• Powers 24V-33.6V equipment when linked in Cinergy mode (series).
• Powers 12-16.8V equipment when linked in PAGlink mode (parallel).
• Provides up to 12A when linked in low-voltage mode, 10A when linked in high-voltage mode, or individually.
• Ideal for powering cameras and accessories simultaneously.
• Linking in low-voltage mode combines capacities, extends run-time and allows hot-swapping for continuous power.
• 2 x D-Tap outputs (12V 80W).
• 1 x USB (5V 2A) output unit which can be swapped for: USB-C, Hirose, Lemo, D-Tap & 2.1-2.5mm.
• 4 x 1/4-inch bushes for mounting accessories.
• Numeric Run-Time, Charge Status & Data Display.
• The best Li-Ion cell for high-current capability and capacity retention above 500 cycles according to NASA Battery Workshop.
• Compatible with PAGlink and Sony 14V V-Mount Li-Ion chargers.
• Compatible with camera data systems that displays state of charge in the viewfinder/LCD (Sony & Red).
• Ergonomic design and soft-touch outer-band for secure handling.
• Durable case construction, with added protection features to withstand the toughest conditions.
• Battery firmware can be updated externally.
• Fully serviceable, modular design that allows authorised cell-pack replacement for greater sustainability.
• Independently UN tested to meet passenger aircraft regulations.
• 2-year warranty with unlimited cycles during that period.

Connector:
V-Mount.

Capacity:
99 Watt-hours (6.7 Ampere-hours).

Output Voltage Range (individually or linked in PAGlink mode):
12V to 16.8V

Output Voltage Range (2 or more batteries linked in Cinergy mode):
24V to 33.6V

Output Current:
10A (12A when 2 or more batteries are linked in parallel).

Outputs:
2 x D-Tap outputs (unregulated) for 12V camera accessories.
1 x USB-A 5V 2A output unit (swappable).

Linking:
Compatible with all V-Mount Mini PAGlink batteries.

Display:
Run-time, on-load, in 1-minute increments. State of charge in 1% increments.
Data: voltage, temperature, charge/discharge cycles and software version.

Dimensions:
Length: 110mm (4.33″).     
Width: 87mm (3.42″).
Height: 55mm (2.16″).

Weight:
630g (1.38lbs).

Warranty:
2 years (unlimited cycles), no conditions on usage.

Patents Apply: paguk.com/patents

Data Sheet

User Guide

Air Transport Certificate

MSDS