A compact, high-power, 2-position, simultaneous Gold Mount charger, ideal for location or workshop use. The PL16 can be used to charge individual batteries, or stacks of up to 8 PAGlink or 10 Mini PAGlink batteries on each position, regardless of their rated capacity or state of charge.

At the end of a shoot, simply link your batteries and connect them to the charger. The next day, they will be fully charged and ready to go, without intervention.

The most discharged batteries will receive charge first. Each battery’s state of charge is displayed on its individual display. When all the batteries are in a similar state of charge (within 20%) they will charge simultaneously, until fully-charged. Batteries may be left on the charger to top-up until required.

• 2-position simultaneous Gold Mount fast-charger.
• Compact and lightweight, with durable aluminium construction, ideal for travel and location use.
• High-powered 100W output (6A at 16.8V).
• Charges simultaneously up to 8 PAGlink or 10 Mini PAGlink batteries per channel.
• Stack batteries on the charger and leave them to charge overnight.
• 4 x 99Wh PAGlink batteries will be fully-charged in less than 6 hours.
• Accepts firmware updates via the battery connectors.
• Incorporates a 100W camera power supply with XLR4 output.

Battery Connectors:
2 x Gold Mount.

For Charging the Following Batteries:
PAGlink
Mini PAGlink

Linked Charging:
Up to 8 PAGlink or 10 Mini PAGlink batteries per channel may be charged. The two generations can be linked. Batteries can be of any rated capacity and in any state-of-charge. Each battery’s state of charge is displayed on its individual display. The most discharged batteries receive charge first. When all the batteries are in a similar state of charge (within 20%) they will charge simultaneously, until fully-charged. Fully charged batteries stop accepting charge automatically and independently of other batteries. Batteries may be left on the charger to top-up until required.

NOTE: The current is shared between the batteries. To charge an individual battery in the fastest time, it is best to connect only that battery to the charger.

Main Charge Program:
Li-Ion Intelligent Parallel Charging program: maximum output 6A at 16.8V (100W approx.). Current is shared between 2 channels.

Recovery Charge Program:
Automatically recovers a Li-Ion battery after it has shut down.
Automatically detects very low battery voltage and initiates a low charge current until voltage has risen enough for normal charging.

Mains Input:
100V to 264V AC. Frequency 47-63Hz. Maximum consumption 220W. 

User Interface:
The charge status of each PAGlink battery is indicated by its own display. The different stages of the charging process are indicated for each channel on the charger s LCD screen. The charger is fully automatic in operation.

Operating Temperature Range:
0C to +40C (+32F to +104F).

Typical Charging Times:
50Wh: 01:15
100Wh: 02:30
200Wh: 03:00
400Wh: 06:00
600Wh: 09:30
800Wh: 11:45
1600Wh: 24:00

Dimensions:
Height: 67mm (2.6″).
Width: 220mm (8.6″).
Length: 190mm (7.5″).

Weight:
1.4kg (3lbs).

Camera Power Supply:
Suitable for powering cameras that can accept a 16.8V input.
Charging is suspended whilst the power supply is in use.

Output:
16.8V DC. Maximum current 5.5A (90W).

Output Connector:
XLR4F connector (pin 1 neg. pin 4 pos.).

Warranty:
2 years.

Data Sheet

User Guide