The MPL150 is a 150Wh Mini PAGlink battery. It is extremely versatile when it comes to powering cameras, accessories and personal devices. No other broadcast/cinema camera battery boasts as many output options. It features a built-in USB type C for 5V, 9V or 12V accessories, which provides up to 30W; a USB-A 5V 2.4A, and a D-Tap for 12V accessories (unregulated). In addition, it has a plug-in USB type C PD 36W output unit, which can be swapped for other output unit options that include Hirose, Lemo and 2.1-2.5mm DC.

The battery can be discharged or charged, individually or linked to other PAGlink Gold Mount batteries, regardless of state of charge and rated capacity. Linking increases capacity/run-time or current draw (up to 12A). PAGlink batteries can also be hot-swapped for continuous running.

The MPL150 features a rugged case design for the protection of the cell-pack, with ‘rubber’ handling and protection features, to endure the most challenging working conditions. It comes with a 2-year warranty.

PAG’s new modular battery design enables an expired cell-pack to be replaced by authorised, local service centres, whilst maintaining the battery’s flight-safety credentials. Case parts and electronic modules can be reused, reducing e-waste for greater sustainability as well as reducing the cost of your next battery.

• Intelligent linking technology that allows capacities to be combined (2 x MPL150s linked = 300Wh).
• Compatible with all PAGlink Gold Mount batteries for linked charging or discharging.
• Draw up to 12A when linked, 10A individually.
• Ideal for powering cameras and multiple accessories simultaneously.
• Hot-swap batteries for continuous power.
• 1 x USB-C PD 30W output.
• 1 x USB-A 5V 2.4A output.
• 1 x D-Tap output.
• 1 x USB-C PD 36W swappable output unit.
• 4 x 1/4-inch bushes for mounting accessories.
• Numeric Run-Time, Charge Status & Data Display.
• The best Li-Ion cell for high-current capability and capacity retention above 500 cycles according to NASA Battery Workshop.
• Compatible with PAG and some Anton Bauer Li-Ion chargers.
• Compatible with camera data systems that display capacity in the viewfinder/LCD.
• Secure handling features and protection ‘bumpers’.
• Durable, nylon case band for the toughest working conditions.
• Battery firmware can be updated externally.
• Fully serviceable, modular design that allows authorised cell-pack replacement for greater sustainability.
• Independently UN tested to meet passenger aircraft regulations.
• 2-year warranty, with unlimited cycles during that period.

Connector:
Gold Mount.

Capacity:
150 Watt-hours (10 Ampere-hours).

Voltage:
14.8V

Output Current:
Individual battery 10A. 2 or more linked batteries 12A.

Fixed Outputs:
1 x USB-C PD 30W (5V 2.4A, 9V 3A, or 12V 2.5A).
1 x USB-A 30W (5V 4.5A, 9V 3A or 12V, 2.5A).
1 x D-Tap 12V (unregulated).

Output Unit (Swappable):
1 x USB-C PD 36W, 5V-3A, 9V-3A, 12V-3A.

Linking:
Compatible with all Gold Mount PAGlink batteries.

Display:
Run-time, on-load, in 1-minute increments. State of charge in 1% increments.
Data: voltage, temperature, charge/discharge cycles and software version.

Dimensions:
Length: 110mm (4.33″).     
Width: 87mm (3.42″).
Height: 81mm (3.18″).

Weight:
850g (1.8lbs).

Warranty:
2 years (unlimited cycles), no conditions on usage.

Patents Apply: paguk.com/patents

Data Sheet

User Guide

Air Transport Certificate

MSDS