PAGlink PL16+ Charger

Model
9711
  • 4-position simultaneous V-Mount fast-charger

  • Charges simultaneously 4 x 96Wh batteries in less than 6 hours

  • Charges simultaneously 16 x 96Wh PAGlink batteries in less than 24 hours

  • Charges simultaneously the latest PAG non-linking Li-Ion batteries (1 per channel)

  • Ideal for charging a mix of PAGlink and non-linking V-Mount Li-Ion batteries

  • High-powered 100W output (6A at 16.8V)

  • Automatic recovery for deeply-discharged batteries

  • Accepts firmware updates via the battery connectors

  • 2 year guarantee

  • 314 x 217 x 67mm / 1.6kg

Linked battery charging was introduced by PAG and is unique to the PAGlink system. Now you can charge more batteries on fewer, smaller and more efficient chargers. PAGlink makes charging easier and more economic.

The 4-position PAGlink PL16+ is the ideal workshop charger for broadcast organizations and rental companies. It greatly reduces the number of chargers required to manage a large PAGlink V-Mount Li-Ion battery inventory.

The batteries can be of any rated capacity and in any state of charge for linked charging. PAGlink intelligent batteries manage their own charging automatically.

8 fully-discharged 96Wh batteries will be fully-charged simultaneously in less than 12 hours; 16 batteries in less than 24 hours.150Wh PAGlink batteries will take 50% longer.

The PL16+ features 4 charging positions, which enable you to charge a mix PAGlink and non-linking V-Mount Li-Ion batteries, manufactured by PAG. PAGlink batteries communicate their individual state-of-charge to the charger. The most discharged batteries are given priority until all the batteries reach a similar state-of-charge. The batteries are then charged simultaneously, using available current in the most efficient way, until they are all fully-charged together. Fully-charged batteries stop accepting charge automatically and can be left safely on the charger until they are needed.

During charging, the percentage state-of-charge of each PAGlink battery is indicated on its individual display. The battery’s numeric display can be inverted, for legibility, with a single button press, and reverts automatically after removal.

The stages of the charging process for each channel are clearly indicated on the charger’s large backlit LCD screen.

An automatic recovery feature is included for deeply discharged batteries. Additionally, the charger will automatically reset Li-Ion batteries if their cut-out has been tripped.

The PL16+ is compact, quiet and cool-running, and features a hard-wearing aluminum case. It weighs only 3.5lbs and its slim design makes it easy to transport.

£573.00
£687.60
Specification: 

Range of Batteries Charged:
Individually or linked:
PAGlink PL96T Model 9304
PAGlink PL96e Model 9303
PAGlink PL150e Model 9308
PAGlink PL150T Model 9309

Individually:
PAG L90 Slim Model 9307V
PAG L96e Model 9310V
PAG L96T Model 9305V

Battery Connectors: 4 x V-Mount.

Main Charge Programs:
Li-Ion Intelligent Parallel Charging program: maximum output 6A at 16.8V (100W approx.).

PAGlink Charging:
Up to 8 PAGlink batteries per channel may be charged. Batteries can be in any state-of-charge. The most-discharged batteries will be given a higher charge priority. Fully charged batteries stop accepting charge automatically and independently of other batteries.

Recovery Charge Program:
An automatic Recovery Charge Program enables deeply-discharged batteries to be charged. Additionally, the charger will automatically recover a Li-Ion battery where the output has been shut down.

Self Test Program:
Monitors the battery under charge, monitors the charger’s own functions, and shuts down to a safe condition should any tests fail.

Mains Input:
100V to 265V AC. Frequency 50-60 Hz. Maximum consumption 220W.

Output Protection:
Protected against short circuit and excess battery voltage.

AC Mains Failure Protection:
Should mains failure occur during a charging program, or whilst the charger is connected, it will shut down to a safe condition.

User Interface:
The charge status of each PAGlink battery is indicated by its own display.
The different stages of the charging process are indicated for each channel on the charger’s LCD screen. The charger is fully automatic in operation.

Operating Temperature Range: 0ºC to +40ºC (+32ºF to +104ºF).

Dimensions:
Height: 67mm (2.64”).
Width: 217mm (8.54”).
Length: 314mm (12.36”).

Weight: 1.6kg (3.5lbs).

Typical Battery Charging Times:
1 battery: 2hrs 30mins
2 batteries: 3hrs
4 batteries: 6hrs
6 batteries: 9hrs 30mins
8 batteries: 11hrs 45mins
16 batteries: 24hrs

The times given are for fully-discharged to fully-charged 94Wh batteries equally distributed across four channels. 150Wh batteries will take 50% longer.

X
To prevent automated spam submissions leave this field empty.
Loading